Swiss Plus SBC-486 Blender, Chopper, Grinder and Mixer User Manual

When using electrical appliances, basic safety precautions should always be followed, including the following: Read all instructions before using SBC-486.

1. To protect against electrical shock, do not submerge the appliance or allow the power cord to come into contact with water or any other liquid.
2. Never leave an appliance unattended when in use.
3. Turn the appliance “Off” and remove the power cord from the electrical outlet when not in use, before assembling or disassembling parts and before cleaning. To unplug, grasp the plug and pull from the electrical outlet. Never pull from the power cord.
4. DO NOT abuse the power cord. Never carry the appliance by the power cord or yank it to disconnect from electrical outlet; instead grasp the plug and pull to disconnect.
5. DO NOT operate any appliance with a damaged cord or plug, or after the appliance malfunctions, has been dropped or damaged in any manner.
6. DO NOT Iet the power cord hang over the edge of table or counter or touch hot surfaces such as the stove.
7. Always use appliance on a dry, level surface.
8. Keep hands, hair, clothing, as well as utensils out of container while processing to reduce the risk of severe injury to persons or damage to the appliance. A scraper may be used but only when the appliance is not running.
9. CAUTION: Blade assembly is sharp, handle with care. When handling the blade assembly, always hold by the shaft.
10. Avoid contact with moving pans.
11. DO NOT attempt to sharpen blades.
12. DO NOT use the appliance if blade assembly is bent or damaged.
13. To reduce risk of injury, never place the blade assembly on base without pitcher or bowl properly attached.
14. DO NOT operate this appliance on or near any hot surfaces (such as gas or electric burner or in a heated oven).
15. DO NOT remove the container from the motor base while the appliance is in operation.
16. The use of attachments or accessories including canning jars, not recommended by the manufacturer may result in fire, electric shock or personal injury.
17. Exercise extreme caution when blending hot liquids.
18. CAUTION: Do not process food or liquid that is hotter than
19. ° F & 82 ° C. Allow very hot ingredients to cool before processing.
20. DO NOT overfill.
21. When processing hot foods or liquids, always open the pouring spout cap to vent the steam. Keep hands and other exposed skin away from the opening to prevent possible burns or scalding.
22. To reduce the risk of injury, NEVER operate the appliance without the lid in place; DO NOT try to defeat the interlock mechanism; make sure that the attachment is properly installed before operating the appliance.
23. To reduce the risk of burns, always allow the appliance to cool after blending hot liquids before taking off parts and before cleaning.
24. If the appliance overheats, a thermal switch will become activated and shut off the motor. To reset, unplug the appliance and let it cool down for approximately 15 minutes before using again.
25. In the event that the unit flashes speeds 1, 2 and 3 from overloading, the unit will shut down. Unplug the unit and wait
26. minutes to reset.
27. THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY. Do not use this appliance for anything other than its intended use. Do not use outdoors.
28. The maximum rating is based on the 6-Blade Assembly (pitcer) that drives the greatest power and other recommened attachments may draw significantly less power or current. NOTE: This unit has a short power supply cord to reduce the risk resulting from becoming entangled in or tripping over a long cord. An extension cord may be used if you are careful in its use. If using an extension cord, the electrical rating of the extension cord should be rated at least 15 amperes. Extension cords rated for less amperage may overheat. An extension cord must be arranged so that it will not drape over the countenop or tabletop where it can be pulled on by children or tripped over accidentally.
29. This device is not intended for use by individuals (including children) with physical, sensory, or mental limitations, or by those who are inexperienced or unaware, unless they are supervised by a responsible person who ensures their safety or provides instructions on how to use the device.
30. Children must be supervised to ensure that they do not play with the device.

CAUTION: Make sure that the motor base is unplugged from the power source.

1. Place the motor base on a clean, dry, level surface.
2. Lower the jar or the bowl onto the motor base.
3. Rotate the container to the left as far as it will go. As the container rotates, it will lower and the safety tabs on the bottom of the container will slide under the safety tabs on the top of the motor base.
4. The jar or bowl can be placed on the motor base ,according to the clockwise rotation.
5. Holding the desired attachment by the shaft, place it onto the gear shaft inside the container. Ensure that the attachment fits around the gear shaft and that it is standing straight.

1. Holding the 6-Blade assembly by the shaft, place it onto the gear shaft inside the jar. Ensure that the attachment fits around the gear shaft and that it is standing straight.
2. Add the ingredients and secure the lid onto the jar.
3. Plug the power cord into the electrical outlet and selet the speed to stan the machine.

1. Place the jar or bowl onto the motor base and insert the desired attachment. (See ‘HOW TO ASSEMBLE’.)
2. Add the ingredients to the container. Make sure your total of ingredients don't go higher than the highest measured marking line on the side of the containers. MAXIMUM CAPACITY: Do not exceed 1700ML marked on the jar.

IMPORTANT: Use the milk shake mixer paddle station when using the dough blade on SPEED1

1. Place the motor base on a clean, dry, level surface such as a counter or table top.
2. Secure the bowl onto the motor base.
3. Holding the dough blade by the shaft, place it onto the gear shaft inside the bowl. Ensure that the attachment flu around the gear shaft and that it is standing straight.
4. Add the ingredients and secure the bowl lid onto the bowl. NOTE: For best results add wet ingredients first and then add dry ingredients. WARNING:
5. Don't use it with water
6. Never leave the appliance unattended while in use

CAUTION: Make sure that the motor base is unplugged from the power source before inserting or removing any attachment and before cleaning. CAUTION DO NOT immerse the motor base into water or any other liquid.

1. Separate/remove all parts from each other.
2. Clean the motor base with a damp cloth and wipe dry. WARNING DO NOT put themotor base in the dishwasher.
3. Place the jar in the dishwasher. Place the lids and attachment on the top rack. Use caution when handling the blade asseblies as the blades are very sharp. NOTE: You may also wash the jar by filling of the jar with warm water and a drop of dish washing detergent, placing the corrsponing lid on the container and start the control knob a few times. Once clean, remove the jar from the motor base. Rinse the container, attachment and lid under running water. Allow all the parts to dry before storing.

1. Store the machine upright with the jar on the motor base, 6-Blade assembly inside the jar and lid on the jar