Swiss Plus SSF-1818D 18-Inch Fan with Touch Controls and Remote User Manual

1. When using electrical appliances, always follow basic safety precautions.
2. This appliance is not intended for use by young children or persons with reduced physical, sensory, or mental capabilities, unless they are under supervision or have been given instruction by a responsible person to ensure safe use of the fan.
3. Children should be supervised to ensure that they do not play with the fan.
4. Keep packaging materials out of the reach of children, as they may cause a suffocation hazard.
5. This appliance is designed for domestic use only and is not suitable for commercial use.
6. Connect the fan only to a properly grounded power outlet with the correct rated voltage.
7. Before use, ensure that the local power supply voltage matches the rated voltage of the fan.
8. Before operating the fan, always fully unwind the power cord to prevent overheating.
9. Do not use the fan if any part of the power cord is visibly damaged.
10. Unplug the appliance from the power supply when it is not in use.
11. In the event of malfunction or abnormal operation, immediately switch off the fan and unplug it from the wall outlet; do not pull the power cord.
12. Keep the main power cord away from heat sources and heat generated by other electrical appliances.
13. Do not make any modifications to the fan or its power cord.
14. All repairs and replacement of parts must be carried out only by an authorized service center using original manufacturer’s spare parts.
15. Do not touch the fan blade or other moving parts while the fan is operating.
16. Do not insert fingers or any foreign objects through the guards while the fan is in operation.
17. Always place the fan on a dry, flat, and stable surface.
18. Clean the appliance only with a damp sponge or cloth.
19. Never immerse the fan in water or wash it under running tap water.

1. Insert the stand fan pole into the base screw in clockwise to fasten the stand pole and base .(Fig, 1) Fig(1 )
2. Put the rear guard on front motor cover and then use the rear guard nut to fasten the rear guard .(Fig,2)

2. Fig(2)
3. Put the fan blade on the motor axial of the motor then use the blade nut to fasten the fan blade .(Fig,3) Fig( )
4. Match the front guard with the rear guard then fasten the clip with the
5. screw.(Fig,4) Pull the inner pole from the stand pole ,until the desired height, tighten adjustment knob to fasten it. Insert the inner pipe into the fan main body and fasten the main Fig( 5 ) Fig( 4 )

5. body nut.(Fig,5)

To operate the fan, you have 2options of control.

• The control panel on the fan unit(16).(Figure1)
• Or by using the remote control.(figure 2) Fig(1 ) Fig(2)

1. MODE: Use the remote control to select the type of wind; Normal, Natural and Sleeping mode. (1) Normal mode enables to select low, middle or high speed. (2) Natural mode enables to select low, middle or high speed. It will imitates the blowing effect of natural wind, making the air volume more comfortable. (3) Sleep mode enables to select low, middle or high speed. In sleep mode, the wind speed will drop by one gear every 0.5h from the initial setting, it keeps operating at low speed until shutdown.
2. SPEED/ON: push this button on the control panel or remote control to turn on the fan and the speed of wind; High, MID and Low speed.
3. TIMER: push this button on the control panel or remote control to set the desired time from 1 to 24 hours.(Step of 1 hour)
4. PRESET: push this button on the control panel or remote control to set the desired time from 1 to 24 hours to preset start fan. PLS NOTED: This function can only be reserved for startup the fan, not for shutdown the fan. (Step of 1 hour)
5. SWING: push this button on the control panel or remote control to enable the fan to start Oscillating or stop at a fix direction.
6. LED DISPLAY: Turns off the control panel lights (only available for remote control)