Swiss Plus SSI-1121D Steam Iron User Manual

Please read the instructions carefully and keep them before use.

1. Do not immerse the product in water or any liquid.
2. This product is only for indoor use and commercial use is prohiied.
3. When the product is connected to the power supply, please make sure the circuit voltage is consistent with the rated voltage of the product, and confirm that the circuit is well grounded.
4. Electric irons must use distilled or purified water; do not use tap water or other liquids.
5. When adding water to the electric iron water tank, the water level shall not exceed the maximum level.
6. When adding or pouring water, the cord plug must be removed from the socket.
7. The product must be used and placed on a stable surface.
8. Electric irons with damaged power cords, or irons that have fallen or have internal leakage, must not be used again.
9. The electric iron must be supervised during operation; the user must not leave it unattended.
10. This device is not intended for use by individuals (including children) with physical, sensory, or mental limitations, or by those who are inexperienced or unaware, unless they are supervised by a responsible person who ensures their safety or provides instructions on how to use the device.
11. Do not let the power cord touch the hot surface of the iron. Wait until the iron is completely cooled before storage, and gently coil the cord around the iron when storing.
12. The iron must be stored out of reach of children, and it must not be treated as a toy. Children refers to those aged 8 to 14.
13. Do not repair or replace the power cord by yourself. If damaged, the device should be serviced or repaired by the dealer’s service center or a qualified technician to avoid electric shock risks.
14. The first use may produce a small amount of smoke, which is normal and will not occur again.
15. After removing the packing, make sure the appliance is not damaged. If you notice any issue, do not use the device and consult a specialist.
16. When the iron releases steam, do not aim the steam at people or animals to avoid burns.
17. When using the iron, do not touch the hot surface with your hand. Hot surfaces include the soleplate and any areas marked with the heat-warning symbol.

1. The plug must be removed from the power socket to cut off the electric iron; or remove the tank from the product before adding water.
2. Electric iron should use pure water or distilled water; do not put tap water or other liquids into the electric iron.
3. The water in the electric iron water tank shall not exceed the maximum water level.

1. Connect the appliance to a suitable circuit and the product
2. When the light turns red, it means that the iron has finished heating and is ready to iron.
3. Do not turn on the steam knob during dry ironing.

1. Fill the tank of the appliance with water.
2. When the iron has finished heating, this function can be used.

In order to prevent consumers from releasing steam at low temperatures—which may cause water to drip from the soleplate—the product is designed with a low-temperature protection function.

1. When the iron is powered on and placed flat or tipped left/right on the table, the product will power off after 30 ± 3 seconds.
2. When the iron is powered on and placed vertically on its heel rest, the power will be cut off after 8 minutes ± 30 seconds.

1. Fill the tank of the appliance with water.
2. Adjust the temperature to “cotton” or above. After heating is completed, open the steam knob, and steam will be released from the soleplate holes.
3. Turn the steam knob to the closed position to stop the release of steam.

1. Do not start cleaning the iron until it has cooled completely.
2. Clean the bottom and surface of the electric iron with a wet cotton cloth. Do not use rough or hard materials, as they may scratch the soleplate.
3. If the appearance of the electric iron is too dirty and cannot be cleaned with a wet cloth, you may use a cloth dampened with a mild neutral detergent. Do not use strong acids or strong alkalis.
4. When there are impurities in the steam holes of the soleplate, use a bamboo stick to remove them. Do not use metal objects, as they may damage the soleplate.
5. When storing the electric iron, be sure to wait until the soleplate has completely cooled.

You can help protect the environment! Please remember to respect the local regulations: hand in the non-working electrical equipments to an appropriate waste disposal center.