Swiss Plus SJE-8420S 4-in-1 Juicer User Manual

1. Keep the cord away from sharp edges and hot surfaces.
2. Do not pull, twist, or wrap the power cord around the appliance.
3. Do not place the appliance near gas or electric oven or store at heated surface.
4. Avoid contacting with moving parts.
5. The grating filter is very sharp, so handle it with care.
6. Always make sure the cover and the safety lock is fastened correctly before switching onThe unit is designed to shut off automatically if locks are not fastened securely in place.
7. Do not turn the appliance continuously for longer than 2 minutes. Turn off switch and let it rest for at least 1 minute to cool down the motor, otherwise the motor may be damaged.
8. Do not push food into the appliance by fingers while it is in operation. If food becomes lodged in feeder tube, use pusher to push it down. If this doesn't work, turn the motor off unplug unit, and then disassemble juice extractor to remove remaining food.
9. Every time make sure that the appliance is unplugged and all moving parts with motor are stopped completely before disassembling and cleaning.
10. Be sure to switch off the unit after each use.
11. Do not overload appliance with products.
12. Before connecting the appliance for the first time, check that voltage indicated on the rating label corresponds to the mains voltage in your home.
13. For home use only. Do not use for industrial purposes. Do not use the appliance for any other purposes than described in this instruction manual.
14. Do not disassemble the multifunction juicer when it is plugged to the power supply.Always unplug the appliance from the powersupply before cleaning and when not in use.
15. To prevent risk of electric shock and fire, do not immerse the appliance in water or any other liquids. If it has happened, unplug it immediately and check in a service center.
16. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
17. Children should be supervised to ensure that they do not play with the appliance.
18. Do not leave the appliance switched on when not in use.
19. Do not use other attachments than those supplied.
20. Do not operate after malfunction or cord damage.
21. Do not attempt to repair, adjust or replace parts in the appliance. Check and repair the malfunctioning appliance in the nearest service center only.

1. After unpacking the unit and before use, check and make sure all mechanical parts of the unit and all attachments are not damaged.
2. Wash and dry all parts of the appliance which will come into contact with food (figure 1). Clean The body of the unit with a soft dry cloth.
3. Practice assembling and dismantling the unit a few times before making juice.
4. Wash fruit and/or vegetables and cut them into pieces that fit into the feeding tube (figure 2).

1. The appliance will only function if all parts are properly assembled and the lid has been properly locked in place with the locking arm.

2. Place the juice collector onto the motor unit, and put the filter basket into the juice collector. Make sure the filter basket is fitted securely onto the driving shaft.Place the lid, and lift the locking arm upwards to the lock position on either side of the lid.

3. Place the pulp container into the appliance by tilting it forward slightly.

4. Slide the pusher into the feeding tube by aligning the groove in the pusher with the small protrusion towards the inside of the feeding tube.

5. Switch on the appliance by turning the control knob to select setting 1 (Low speed), 2 (Normal speed), or P (Pulse) to start

6. Put the pre-cut pieces into the feeding tube and gently press them down toward the rotating filter basket with the pusher. Make sure the juice jug is placed under the juice spout before making juice.

• Unplug the appliance from the power supply.
• Release the lock arm.
• Remove the pulp container, transparent lid, and pusher. Pull the filter basket upward and take out the juice collector separately.

• This appliance is equipped with a safety lock system. If the transparent lid is not correctly placed or the lock arms are unfastened the appliance will not function.
• Before starting, ensure the appliance is switched off, and that the transparent lid and locking arm are properly secured.
• Wash fruits and vegetables thoroughly. Cut them into small pieces to fit into the feed tube. Remove stones or peels from fruits such as prunes, apricots, cherries, oranges, lemo melons.
• Plug in and switch on the appliance, then choose the desired setting according to the type of fruits or vegetables.
• Put the prepared fruits and vegetables into the feed tube and press down gently with the pusher.
• Never use fingers or other objects as a pusher.
• When the pulp container or juice jug is full, switch off the appliance and empty the containers before continuing.

• Do not run the juice extractor continuously for more than 2 minutes. If more time is needed, switch it off occasionally to allow the appliance to cool down.

CAUTION :

• Remove large seeds or pits from fruits like apricot, peach, plum, and cherry. Peel off thick skins if the seeds or skins are inedible.
• Do not use unsuitable fruits or vegetables such as banana, mango, papaya, coconut, or other hard foods.
• After use, switch off the appliance and unplug it from the power supply.

1. Screw the jug tightly onto the base, and put the pre-cut fruit or vegetables (1-2 cm pieces) into the jug.

2. Add some water or another liquid, cover the jug, then place it onto the motor shaft and fasten it securely

3. Plug in the appliance and turn the knob to 1 or 2 to start blending.

4. After sufficient blending, turn the switch knob to
5. then unplug the appliance and unscrew the jug.

• Before using the blender, make sure that the appliance is switched off and the lid is properly closed.
• Do not operate the blender without any ingredients inside.
• When blending thick, sticky, or low-moisture ingredients, fill only one-third of the jar and, if possible, add a small amount of suitable liquid.
• The maximum capacity of the blender jar is 1500 milliliters.
• Do not operate the appliance continuously for more than two minutes.
• Do not pour hot food or liquids into the jar, as the pressure from steam may cause the contents to splash or overflow.

1. Attach the chopper bowl to the chopper base and turn it until it is securely locked in place. Then, add up to 250 grams of the desired food ingredients into the chopper bowl.

2. Close the lid of the chopper. Place the chopper assembly onto the main body of the appliance and twist it to lock it securely.

3. Plug the appliance into a power outlet. To start operation, turn the speed control knob to
4. (low speed), 2 (high speed), or to the Pulse function.

4. After use, turn the speed control knob to 0 and unplug the appliance from the power outlet. Then remove the chopper bowl and base assembly from the main unit.

• Before plugging in the appliance, make sure that the unit is switched off and the chopper lid is properly closed.
• Do not operate the chopper without any ingredients inside.
• If the blade slows down or stops during operation, switch off the appliance immediately and unplug it from the power outlet. Remove any food residues or obstacles (such as layers of fat or hard lumps) from around the blade. After ensuring that the blade moves freely, switch the appliance on again.
• The maximum capacity of the chopper bowl is 250 grams.
• Do not operate the appliance continuously for more than one minute.

1. Reverse the milling container, then put the ingredients inside. Screw the container tightly to the base.

2. Put the mill onto the motor housing, plug it in, and switch it on to start grinding. Always hold the motor housing with one hand while grinding.

3. Reverse the container and tap off any ingredients that have adhered. Then unscrew the container and pour out the contents..

4. Unplug the appliance after completing grinding, unscrew the mill, and remove it from the motor housing.

• Make sure the switch is off before operation.
• Do not run the appliance unloaded.
• Maximum grinding capacity: 50 g.
• Do not operate the mill for longer than 60 seconds at a time.

• Switch off the appliance and unplug before cleaning.
• The appliance is easier to clean if you clean it immediately after use.
• Do not use abrasive cleaning agents, scourers, acetone, alcohol, etc. to clean the appliance.
• All detachable parts are dishwasher-safe.
• Clean these parts with the cleaning brush in warm washing-up liquid and rinse them under the tap.
• Wipe off the motor unit with a soft dry cloth, and keep it away from water.
• Blade is sharp, take special care when cleaning.
• Check the filter basket for signs of damage; do not use it if the filter basket is damaged.
• Never immerse the motor unit in water nor rinse it under the tap.

• Before storage, make sure the appliance is unplugged and completely stopped.
• Air dry and wipe clean all the detachable parts.
• Assemble the clean parts and accessories into a complete appliance by following steps in the ASSEMBLE chapter.
• Store the cleaned appliance in a dry and flat place.